‹
Back
 
16:10 - 18:30
WIND & SOLAR WS SESSION 2C – WIND POWER SYSTEM MODELING
›
Room: Ballroom Berlin 3
16:10 - 16:30
WISO25-124
Open-source implementation of a DFIG wind turbine model based on IEC 61400-27 international guideline using Python
›
Javier Jiménez-Ruiz, Renewable Energy Research Institute and DIEEAC-ETSII-AB, Universidad de Castilla-La Mancha, Spain
16:30 - 16:50
WISO25-152
Power Oscillations Damping by Wind Power Plants: Design, Field Tests Verification and Model Validation
›
Germán Claudio Tarnowski, Vestas Wind Systems A/S, Denmark
16:50 - 17:10
WISO25-252
A Model‐Validation Workflow: Case Study on IEC 61400-27 Type 4
›
Sid Ahmed Attia, The MathWorks GmbH, Germany
17:10 - 17:30
WISO25-254
Enabling technologies for the collaborative exchange of tool-independent dynamic simulation models – the Functional Mock-up Interface (FMI) case
›
Adrian Constantin, DIgSILENT GmbH, Germany
17:30 - 17:50
WISO25-286
Generic Modeling of DFIG Wind Turbines for Grid-Following and Grid-Forming Applications: Validation Through Hardware-in-the-Loop Simulations
›
Nishant Bilakanti, Electric Power Research Institute (EPRI), United States
17:50 - 18:10
WISO25-76
Lessons learned validating system operation limits with EMT in a radial network with a high penetration of wind generation
›
Billy Labelle, Hydro-Québec, Canada
18:10 - 18:30
OPEN FLOOR / DISCUSSION